PERANCANGAN, PEMBUATAN DAN PENGUJIAN SUDUT URBIN ANGIN SUMBU VERTIKAL TIPE CONE INVOLUTE SEBAGAI SUMBER ENERGI ALTERNATIF LAMPU PENERANGAN JALAN

NURLAKSONO, ADID MUFID (2010) PERANCANGAN, PEMBUATAN DAN PENGUJIAN SUDUT URBIN ANGIN SUMBU VERTIKAL TIPE CONE INVOLUTE SEBAGAI SUMBER ENERGI ALTERNATIF LAMPU PENERANGAN JALAN. Other thesis, University of Muhammadiyah Malang.

[img]
Preview
Text
PERANCANGAN.pdf

Download (52kB) | Preview

Abstract

In the last decade major reserves of fossil fuel energy sources have started to thin out, while the demand for energy is increasing due to the growth of population, economic growth and energy consumption pattern itself is constantly increasing. One of the source renewable energy which is interest to study is wind energy. Research wind energy conversion system low speed not yet widely used in Indonesia, while there are several locations that have a continuous low wind speeds that allow for convert to energy. The use of lighting at night is one thing to absorb quite a lot of electrical energy, particularly in public street lighting. As a solution, in this study designed the blade vertical axis wind turbine type cone involute to convert wind energy as an alternative energy source. Vertical axis wind turbines are still rare in Indonesia and the type of cone involute is a new technology implementation Vertical Axis Wind Turbine (VAWT) which is still little study in design and manufacture. This type of VAWT is safer to use than the horizontal axis type. Some of the assumptions used to design a propeller shape cone involute, because of limitations data. This wind turbine generator connected to the axial flux type (AFPMG - Axial Flux Permanent Magnet Generator). This generator is very suitable for vertical wind turbines because of its low speed and can connect directly to the main axis of the turbine so that eliminating transmission losses. On the testing of blade vertical axis cone involute turbine without the generator obtained tip speed ratio (TSR) 1.002423.

Item Type: Thesis (Other)
Subjects: T Technology > TJ Mechanical engineering and machinery
Divisions: Faculty of Engineering > Department of Mechanical Engineering
Depositing User: Rayi Tegar Pamungkas
Date Deposited: 15 May 2012 02:42
Last Modified: 15 May 2012 02:42
URI: http://eprints.umm.ac.id/id/eprint/5235

Actions (login required)

View Item View Item