Pengaruh Temperatur Pemanasan Dan Waktu Holding Serat Daun Nanas Terhadap Kekuatan Impact Komposit Epoxy Dengan Metode Vacuum Infusion

Mamungkas, Mohamad Irkham and Subeki, Nur and Albab, M. Ulul (2021) Pengaruh Temperatur Pemanasan Dan Waktu Holding Serat Daun Nanas Terhadap Kekuatan Impact Komposit Epoxy Dengan Metode Vacuum Infusion. ROTOR: Jurnal Ilmiah Teknik Mesin, 14 (1). pp. 18-24. ISSN 2460-0385

[thumbnail of Mamungkas Subeki Albab - Composite impact heating temperature vacuum infusion.pdf]
Preview
Text
Mamungkas Subeki Albab - Composite impact heating temperature vacuum infusion.pdf

Download (302kB) | Preview
[thumbnail of Similarity - Mamungkas Subeki Albab - Composite impact heating temperature vacuum infusion.pdf]
Preview
Text
Similarity - Mamungkas Subeki Albab - Composite impact heating temperature vacuum infusion.pdf

Download (2MB) | Preview

Abstract

Technological developments, especially in the material sector, have led to new discoveries, one of which is the composite type material. Composites have been widely used in the automotive industry, both for exterior and interior. This is what encourages research on composites to continue to be developed. This study aims to determine the effect of heating temperature and heating time on pineapple leaf fibers on the impact strength using the vacuum infusion method. The temperature variations given are 70 °C, 80 °C, and 90 °C. While the variation of drying time is 1 hour, 2 hours, and 3 hours. Composite material manufacturing refers to ASTM D5942-96 standard. The results of this study indicate that the highest impact value occurs in specimens with a heating temperature variation of 80 ° C with a heating time of 3 hours, which is 0.075 Joules / mm². While the lowest impact strength occurs in specimens with a heating temperature of 70 ° C with a heating time of 2 hours, which is 0.01943 Joules / mm².

Item Type: Article
Keywords: Composite, impact, heating temperature, vacuum infusion
Subjects: Q Science > Q Science (General)
T Technology > T Technology (General)
T Technology > TJ Mechanical engineering and machinery
Divisions: Faculty of Engineering > Department of Mechanical Engineering (21201)
Depositing User: maulana Maulana Chairudin
Date Deposited: 01 Dec 2023 01:25
Last Modified: 01 Dec 2023 01:25
URI: https://eprints.umm.ac.id/id/eprint/1646

Actions (login required)

View Item
View Item