Items where Author is "Aisyah, Iis Siti"

Article

Soegiharto, Achmad Fauzan Hery and Munir, Fudhail Abdul and Aisyah, Iis Siti and Aryanamurti, Mahatma Putra and Yuliati, Lilis and Ayun, Evita Leninda Fahriza (2023) Characteristics of Butane Combustion in Mesoscale–Combustor Due to Stainless Steel Flame Holder Type. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 104 (2). pp. 161-173. ISSN 2289-7879

Hendaryati, Heni and Mamungkas, Mohamad Irkham and Aisyah, Iis Siti and Rusmana, Muhammad Hasbi (2022) The effect of variations in thickness of 2024 T42 aluminum plate on tensile strength and macrography in the process of resistance spot welding. Jurnal Terapan Teknik Mesin, 3 (2). pp. 96-107. ISSN 2721-7825

Aisyah, Iis Siti and Salim, Agus and Hendaryati, Roro Heni and Sofi'i, Yepy Komaril and Prasetyo, Krismondo Reza (2022) The Effect of Variation of Aluminum Thickness Series 7075 in Heat Treatment Solution on Tensile Strength and Microstructure. Materials Science Forum, 1051. pp. 131-136. ISSN 1662-9752

Aisyah, Iis Siti and Caesarendra, Wahyu and Kurniawati, Dini and Maftuchah, Maftuchah and Agung, Deva and Glowacz, Adam and edkiewicz, Krzysztof Oprz and Liu, Hui (2021) Study of Jatropha curcas Linn and Olea europaea as Bio-Oil Lubricant to Physical Properties and Wear Rate. Lubricants, 9 (4): 39. pp. 1-11. ISSN 2075-4442

Maftuchah, Maftuchah and Reswari, Helvi Ardana and Soegiharto, Achmad Fauzan Hery and Kurniawati, Dini and Aisyah, Iis Siti and Septia, Erfan Dani and Zainudin, Agus (2020) Tingkat Produksi Biji, Kualitas Crude Jatropha Oil dan Biodiesel Jatropha curcas sebagai Sumber Biofuels. Jurnal Ilmiah Inovasi, 20 (3). pp. 45-52. ISSN 2548-4281

Harsito, Akmal Hanif Khairullah and Aisyah, Iis Siti and Daryono, Daryono and Saifullah, Ali and Hendaryati, Heni and Sudarman, Sudarman (2020) The Effect of Agitation Parameter on Hardness and Thickness of Decorative Nickel-Chrome Coating on A36 Steel using Electroplating Process. Journal of Energy Mechanical, Material, and Manufacturing Engineering, 5 (2). pp. 57-62. ISSN 2548-4281

Kurniawati, Dini and Aisyah, Iis Siti (2020) The Potent of Carrier Oil on Pretreatment of Crude Jatropha Curcas Oil. Journal of Energy Mechanical, Material, and Manufacturing Engineering, 5 (1). pp. 45-52. ISSN 2548-4281

Refiadi, Gunawan and Aisyah, Iis Siti and Siregar, Januar Parlaungan (2019) Trend in lightweight automotive materials for improving fuel efficiency and reducing carbon emission. Automotive Experience, 2 (3). pp. 33-42. ISSN 26156202

Saifullah, Ali and Reynaldi, Ferdian and Aisyah, Iis Siti and Soegiharto, Achmad Fauzan Hery (2019) The Effect of Heat Treatment on Hardness and Microstructure of Al-Cu Squeeze Casting Product. JEMMME (Journal of Energy, Mechanical, Material, and Manufacturing Engineering), 4 (1). pp. 57-62. ISSN ISSN 2541-6332 | e-ISSN 2548-4281

Pasang, T. and Kirchner, A. and Jehring, U. and Aziziderouei, M. and Tao, Y. and Jiang, C. -P. and Wang, J. C. and Aisyah, Iis Siti (2019) Microstructure and mechanical properties of welded additively manufactured stainless steels SS316L. Metals and Materials International, 25. pp. 1278-1286. ISSN 1598-9623

Chowdhury, Azrin Akhter and Aisyah, Iis Siti (2018) Mechanical and Corrosive Nature of Galvanized Steel in Sodium Chloride Solution. Journal of Energy Mechanical, Material, and Manufacturing Engineering, 3 (2). pp. 69-78. ISSN 2548-4281

Book Section / Proceedings

Aisyah, Iis Siti and Putra, Handika Rachmansyah and Mulyono, Mulyono and Sukarniyati, Sri (2021) Analysis of crack length and life flight cycle in center wing lower surface skin access hole aircraft with DCRACK software. In: 2020 International Conference on Mechanical Engineering Research and Application (iCOMERA). IOP Conference Series: Materials Science and Engineering, 1034 . IOP, Malang, Indonesia, pp. 1-12. ISBN 17578981

Maftuchah, Maftuchah and Reswari, Helvi Ardana and Fauzan, Ahmad and Kurniawati, Dini and Aisyah, Iis Siti and Septia, Erfan Dani and Zainudin, Agus (2020) Produktivitas Biji Jarak Pagar Sebagai Penghasil Biodesel Dan Kandungan Free Fatty Acid Dalam Crude Jatropha Oil. In: Seminar Nasional Terapan Riset Inovatif (SENTRINOV). Engineering and Science, 6 (1). ISAS Publishing, Banyuwangi, Indonesia, pp. 1192-1199. ISBN 2621-9794

Aisyah, Iis Siti and Rama, Randika and Murjito, Murjito and Sudarman, Sudarman and Suprianto, Herry (2020) Analysis on Rotational Speed and Material of Twist Drill to Its Worn and Burr Formation in Drilling Ti-6Al-4V. In: The 2nd International Conference on Computer, Science, Engineering, and Technology. Journal of Physics: Conference Series, 1477 (2). IOP, Banten, Indonesia, pp. 1-12. ISBN 1742-6596

Aisyah, Iis Siti and Rusdiantoa, Mukhammad and Soegiharto, Achmad Fauzan Hery (2020) Studi Pemesinan Ti6246 dengan Jatropha Curcas Sebagai Bio-Lubricant Terhadap Surface Roughness dan Bentuk Geram. In: Seminar Nasional Teknologi dan Rekayasa (SENTRA). Universitas Muhammdiyah Malang, Malang, Indonesia, pp. 72-79. ISBN 2527-6050

Fuad, Bian Yusriansyah and Aisyah, Iis Siti and Kurniawati, Dini and Agussalim, Agussalim (2020) Pengaruh Kombinasi Ketebalan Plat Aluminium 2024 T42 Terhadap Sifat Mekanis pada Proses Resistance Spot Welding Part Door Assy Helikopter NBELL 412EP. In: Seminar Nasional Teknologi dan Rekayasa (SENTRA). Universitas Muhammdiyah Malang, Malang, Indonesia, pp. 151-162. ISBN 2527-6050

Aisyah, Iis Siti and Rif’at, Muhammad and Saifullah, Ali (2019) Pengaruh Variasi Waktu Sintering Terhadap Karakter Intermetallic Bonding Al-Ti Hasil Metallurgi Serbuk. In: Seminar Nasional Teknologi dan Rekayasa (SENTRA). Universitas Muhammdiyah Malang, Malang, Indonesia, pp. 76-81. ISBN 2527-6050

Aisyah, Iis Siti and Widyawati, Yeyen Ika and Kurniawati, Dini and Sewoyo, Trihono and Maftuchah, Maftuchah and Saifullah, Ali (2018) Investigasi Potensi Jarak Pagar Sebagai Pelumas Anti Gesek. In: Seminar Nasional Teknologi dan Rekayasa (SENTRA). Universitas Muhammdiyah Malang, Malang, Indonesia, pp. 167-173. ISBN 2527-6050

Patent / Intellectual Property Rights (IPR)

Achmad Fauzan, lis Siti Aisyah, Mohamad lrkham Mamungkas, Lailis Syafa'ah, (2021) Pembakar Skala Meso Tipe Tabung yang disempurnakan. IDS000007655B.