SIGIT, PURNOMO (2009) PERANCANGAN DAN PEMBUATAN SISTEM KONTROL PROTOTYPE ELEVATOR MENGGUNAKAN MIKROKONTROLER ATMEGA8535(HARDWARE). Other thesis, University of Muhammadiyah Malang.
Download (52Kb) | Preview
In lifting a thing from lower part to the higher one or vice versa, there is needed an auxiliary apparatus; what is meant here is elevator (lift). In setting in moving an elevator, there should be a system to control the movement from the elevator in order to it can serve appropriately needed. Therefore, on the control system of this elevator prototype uses a microcontroller as its controller. Microcontroller used here is microcontroller ATMEGA8535; because it has 3 external interrupt sources so that it is fulfilling all interrupt order in the elevator prototype. By using interrupt order, the elevator can serve many directions or orders that are given simultaneously. Then, it can prioritize the direction or order that should be fulfilled first. The purpose of this final project is to design the elevator prototype control system by using microcontroller Atmega8535 and make the elevator prototype control system from that result design. Stage from this designing is design microcontroller Atmega8535 series as central control from all series, H bridge series as movement control of elevator motor and elevator window, optocoupler censor series as position censor of elevator, limit switch series as command requesting and purpose, seven egment series as display from elevator position, and interrupt series as interrupt command from position, requesting and purpose. From this designing, it can be resulted the controller series of elevator by using microcontroller Atmega8535.
|Item Type:||Thesis (Other)|
|Subjects:||T Technology > TJ Mechanical engineering and machinery|
|Divisions:||Faculty of Engineering > Department of Mechanical Engineering|
|Depositing User:||Anggit Aldila|
|Date Deposited:||30 Jun 2012 04:15|
|Last Modified:||30 Jun 2012 04:15|
Actions (login required)